Last updated: Jun 01, 2020 13:42
The following sections explain how to read and use the different parts of the Report Library view.
The header bar across the top of the display (just below the top-level Test Analysis tabs) displays:
- Saved view selector - If you have any pre-configured views, select to view the current data based on the configured selections.
- Active filters - Lists all of the currently selected filters and groupings for the list.
- Search field - Lets you search for keywords to display only tests with names that match the entered term.
The section just below the header bar includes statistical views of the listed tests:
- Statistical Overview shows general statistics of the currently listed tests, split into the number of passed, failed, blocked, and other tests.
- Run History provides an overview of dates when tests were run. The view is color-coded to show the number of passed, failed, blocked, and other tests for a particular date.
Use the Hide charts/Show charts link above the charts to toggle the display.
The table in the Report Library view lists the following information for all test reports.
|Column||Sub-column||Description||Displayed by default|
|Report Name||The script name as supplied in the PerfectoReportiumClient testStart() method. The column includes a checkbox that you can use to select test reports for the Cross Report view.||Yes|
The final status reported by the specific test run. The test status is one of: Passed, Failed, Blocked, Unknown.
|Cross Report||Indicates if the test report is part of a cross-report.||Yes|
Indicates when this test run was executed relative to other runs of the same test. (See below for more detail.)
|Failure/Blocked Reason||Indicates a reason detected, either automatically by Smart Reporting heuristics or by the testers (see Implement the reporting framework), why the test failed. For more information, see below.||Yes|
|Platform||Indicates if tests were executed on Mobile or Web devices. May include an indication of the number of devices executed on.||Yes|
Icon that identifies if the testing device was a Mobile or Desktop Web device.
List of devices used in the test, with each device separated by comma.
For mobile devices, provides the ID number of the testing device.
|Browser||Browser version for Web devices.||Yes|
|OS||List of operating system versions, coordinated with devices list.||Yes|
List of device resolutions, coordinated with devices list.
|Job||Details of the CI Job reported for this test.||No|
Job name as reported in the execution context.
|#Number||Job number as reported in the execution context.||No|
|Branch||Job branch as reported in the execution context.||No|
|Time||Provides details of when test was run and its duration.||Yes|
|Start||Start time of the test run.||Yes|
|Duration||Duration time of the test.||Yes|
|Tags||Indicates the number of tags associated with the test run.||Yes|
|Lab||Indicates if test was run in a Perfecto CQ Lab.||No|
|Automation Framework||indicates the automation framework supported by the device used by automation script.||No|
Test history information
The history graph in the History column shows a series of nodes. Each node represents a single run of the test.
The test run whose details are described in this report is displayed as a double-ring in the history (). This makes it easier to identify when this test run was executed relative to other test runs. When reading the history graph, keep in mind that:
- The latest test run is always represented by the right-most node.
- No more than five nodes appear in the history graph. If the specific run occurred prior to the five latest runs, the graph shows a break represented by three dots ( ).
- The color of the node represents the test result status for that particular run, where green means 'passed', yellow means 'blocked, and red means 'failed' ( ).
Move the pointer over a node to display a tooltip with details for that run.
Arrows around an icon () identify test runs with scheduled retries that have been collapsed into a single test report.
For a test to be considered a retry, it must share the same parameters and CI job name and number or be part of the same execution. Perfecto does not list a test that is considered a retry in the table and does not take it into account when calculating statistics. Only the last test in a retry series makes it into the statistics. For more information, see STR.
Smart Reporting is designed to provide the test data from your test runs, but also to allow you - the tester or the test manager - to better understand the results of your tests. If your test ends with a success status, then you know that all is well. However, when a test fails, Smart Reporting may analyze the test data and provide a failure reason that indicates what caused the test to fail.
The Smart Reporting system provides functionality that supports generating this failure reason classification, either:
- Manually by the test script, based on the stage in the script execution when the test is determined to have failed.
- Automatically. Smart Reporting analyzes the entire test information and generates the reason based on a heuristic classification.
In either case, the failure reason is color-coded (where green means 'passed', yellow means 'blocked, and red means 'failed') and displayed in the table of the test reports, in the Failure/Blocked Reason column, to allow a quick overview of the different failed tests. If a test fails without reporting a failure reason, the Status column will show a red icon, but the Failure/Blocked Reason column will be blank.
The Smart Reporting system automatically identifies instances when the test failed before the test was able to start. When these failures occur, the report is marked with a blocked failure reason (that will appear in the table as the Failure Reason, color of reason in yellow) and the Status column will show a Blocked status ( ). These blocked failure reasons are completely controlled (failure reason text and color) by the Smart Reporting system. Some examples of blocked failure reasons include:
Device in use
Device not connected
Device not found
You can move the pointer over the tag icon in the Tags column for a specific test to display a tooltip that lists all tags associated with the test.
This tooltip is an active tooltip. Clicking a tag filters the table to show only tests associated with that tag.
Filter the list of displayed test runs, to limit the list to those that comply with the selected parameters or time frame.
Create groups of test runs to display in the groups overview.
For more information on the sidebar, read here.
Focus on what's important to you
The following sections explain how you can group and filter information in the Report Library to narrow your focus on the details you need to see.
Search reports by name
When the Report Library includes a wide variety of tests, you can use the Search field at the top to focus on the set of tests you are interested in.
To search reports:
- Start typing the name (or any sub-string of the name). Smart Reporting presents a list of suggested available test names.
- Do one of the following:
- Select the test name from the list of suggestions.
- Complete typing the requested name and press enter.
The list refreshes to display only tests with names that match the search term. If no tests match the search term, a 'No reports found' message appears.
Filter by status
You can use the Statistical Overview area to focus on reports with a selected final status:
- Click a counter (Failed, Passed, Blocked, Unknown) to filter the list to show only those reports with the selected status.
- Click Tests to list all test reports.
For example, if 26 tests have a status of Blocked, clicking the Blocked counter filters the list to display only the 26 reports that are currently blocked.
The table may show information that is not relevant at the moment. You can configure it to hide or show columns as needed.
To configure columns:
Click the pliers iconabove the table to display a menu of columns you can configure to appear in the Report Library table.
Select the box next to columns you want to include in the table or clear check boxes of columns you don't want to display.
Filter or group by custom fields
Use the custom fields defined at the different context classes or as part of the JVM command line parameters (with CI) to refine your results beyond built-in filter categories and tags. Custom fields are <name, value> pairs, so they allow for an additional level of segregation. You can filter and group by custom fields. In addition, you can add a custom field as a column to the report table (see Configure columns).
To filter by custom fields:
- In the sidebar, under Filter, click ADD FILTER GROUP and select a value from the list. You may need to scroll down to find the field you are looking for.
The custom field is added as a filter category.
- From the list that opens below the custom field, select a value and whether you want to include or exclude this value.
The list of reports refreshes to show the updated filter settings.
To group by custom fields:
- In the sidebar, under Group By, select the required custom field from the list.
Filter by tags
Use the tags defined by the different context classes to better focus the analysis of the test results by filtering the tests to the subset of interest.
See Tag-driven reports (RTDD workflow) on how to optimize your test tags for efficient test analysis.
To filter by tags, do one of the following:
- In the Tag column, click the tag icon. In the tooltip that displays, click the tag you want to filter by.
- In the sidebar, under Filter, expand the Tags section and select one or more relevant tags.
The following figure shows the table filtered by the tags iPhone 7 and XCTest. Note the indications of the filtering in the right pane.